2. Woodworking

Woodworking & Tools

Read More
In Mike's harrow disk, (soon to be a forge), a 14" brace, Ohio tool depth stop, blacksmith made flux spoon with really nice end hook, a Dex knife, pair of tongs, stamping block, and a couple of table latches.<br /> <br /> Bills Fish cooker (soon to be Shaker box boiler) hiding on the left, Big LV mallet, Divider (more later), adze minus the handle, 10 1/2 needing a crack repaired, wandering number stamp set, and 2 chisels, swedish I think.
20 / 604

In Mike's harrow disk, (soon to be a forge), a 14" brace, Ohio tool depth stop, blacksmith made flux spoon with really nice end hook, a Dex knife, pair of tongs, stamping block, and a couple of table latches.

Bills Fish cooker (soon to be Shaker box boiler) hiding on the left, Big LV mallet, Divider (more later), adze minus the handle, 10 1/2 needing a crack repaired, wandering number stamp set, and 2 chisels, swedish I think.

  • Langdon All Steel Miter Box, Post Extended
  • mbanglestop
  • mbintstop1
  • Hold in for crown molding, or maybe to move the stock for more acute angles
  • Length stop. The block holding this in not interchangeable with the hold in on the other end.
  • adirondack
  • Roy Grigg's File Rack, an idea I like
  • My attempt at file storage. Need to widen a few slots, and create more storage, this is overflowing now. Originally designed to mount vertically on a cabinet door, but didn't have the clearance to make it fit.
  • planing stops
  • Bay Area Galoots Group shot from 2005 Gathering at Tom's Place
  • Galootaclaus Christmas gift, from the Netherlands, a pair of custom ground skew chisels, and reprint of a Nooitgedagt catalog, and a sharpening stone.
  • No name ratcheting tool handle, with a gimlet in it.
  • DSC08347
  • Close up of the gimlet direction adjuster, and the shank of the tool bit.
  • Greg and Bill Laying out tools to shoot, Mike S in the back looking for his car. 071007 Alameda run.
  • ohiorabbet
  • Top left Kirk's 2 planes, Center Bill's goodies Center, Mikes on the Right<br /> lower left, Greg's gouges and mallet
  • gouge
  • From Top, Kirk's 18 No 70 hollow plane, and a 1" Ohio Tool Dado Plane<br /> Greg's mallet, gouges, a square, and a block plane
  • In Mike's harrow disk, (soon to be a forge), a 14" brace, Ohio tool depth stop, blacksmith made flux spoon with really nice end hook, a Dex knife, pair of tongs, stamping block, and a couple of table latches.<br /> <br /> Bills Fish cooker (soon to be Shaker box boiler) hiding on the left, Big LV mallet, Divider (more later), adze minus the handle, 10 1/2 needing a crack repaired, wandering number stamp set, and 2 chisels, swedish I think.
  • No Comments
  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2023 SmugMug, Inc.