2. Woodworking

Shop Stuff

Read More
Slow Speed Grinder from CL, Veritas Grinder Rest and Jig, mounted to a plywood base for transporting around the shop
34 / 57

Slow Speed Grinder from CL, Veritas Grinder Rest and Jig, mounted to a plywood base for transporting around the shop

  • Saw till from a gun rack, after a few coats of amber shellac to tone thing in better.
  • DSC09500
  • My sharpening bench, small plane storage cabinet, and saw till
  • Power Tool Storage, misc storage, and the stack of tools to be refurbished in the back
  • DSC09504
  • DSC09505
  • DSC09538
  • Wine box to be upgraded for spokeshave storage
  • Prototype file storage
  • Finalized design for wood rasp storage. Couple of open slots are en route to Boggs.
  • Fence end of the shooting board. Fence is 2 layers of 1/2" ply
  • Shooting board, approx 24" tall by 12" wide, plus 3" runway
  • DSC09759
  • Slow Speed Grinder from CL, Veritas Grinder Rest and Jig, mounted to a plywood base for transporting around the shop
  • 4 of the 5 screw holders. 2 flat head on left, 2 Phillips head on the right. 2nd from right is just like 2nd from left, but with longer pointy prongs to hold a Phillips better
  • Modified the LV grinder rest to raise the base, now its much more solid in use.<br /> <br /> And yes, I did move it right slightly after I took the picture.
  • My Scary sharp setup, 220 on right, 2000 on left, 1/4" glass
  • The back, 50 grit AlZi and 150 grit
  • Benchhook for the table saw
  • IMG_20210424_152955
  • No Comments
  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2023 SmugMug, Inc.